植筋胶具有粘接强度高、如同预埋，常温固化、硬化过程收缩小，耐温性能好、可在埋筋后焊接，耐久性、耐候性好，抗老化、耐介质（酸、碱、水）性能好，固化后韧性、抗冲击能力优异，不含挥发性溶剂、无毒环保，A、B组分配胶比例宽、施工方便等特点。
ETA认证作为锚固行业的重要认证，是锚固产品对于制定应用范围技术性能的有力证明，在选择锚栓时，认清具有CE标识的专业锚固，可以为建筑施工提供安全保障，也是鉴定锚栓是否安全可靠的重要依据。
植筋胶适用于：
1.各种建筑结构中钢筋、螺杆埋植，建筑结构加固、补强，建筑结构框架、剪力墙植筋。
2.各种设备基础的固定，铁路、公路、桥梁、水利改扩建工程加固
3.广告牌、隧道管线、高架道路隔音板和护栏 固定
4.环氧建筑植筋胶配合螺杆使用
植筋胶ETA认证：EAD 330087-00-0601（EAD 330087-00-0601）
EAD 330087-00-0601 Systems for post-installed rebar connections with mortar 后锚固连接系统ETA认证
植筋胶出口欧盟，需满足ETA认证要求，主要测试包括：
Basic Works Requirement 1: Mechanical resistance and stability
Characteristic resistance to tension load (static and quasi-static loading)
1 Resistance to steel failure (tension) 2.2.1
2 Resistance to combined pull-out and concrete failure 2.2.2
3 Resistance to concrete cone failure 2.2.3
4 Edge distance to prevent splitting under load 2.2.4
5 Robustness 2.2.5
6 Maximum setting torque moment 2.2.1.2
7 Minimum edge distance and spacing 2.2.6
Characteristic resistance to shear load (static and quasi-static loading)
8 Resistance to steel failure (shear)
9 Resistance to pry-out failure
10 Resistance to concrete edge failure 2.2.9
Displacements under short term and long term
11 Displacements under short term and long term
loading 2.2.10 （0, ∞）[mm or mm/(N/mm2)]
Durability
12 Durability of metal parts 2.2.11
Characteristic resistance and displacements for seismic performance categories C1 or C2 (optional)
13 Resistance to steel failure
14 Resistance to pull-out
15 Fracture elongation
16 Factor for annular gap
17 Displacements
ETA认证与CPR指令CE认证的关系
Under the CPR, harmonised technical specifications are harmonised European product standards (hENs) established by CEN/CENELEC2 or European Assessment Documents (EADs) produced by the European
CPR指令认证的依据是建筑指令欧盟协调标准或欧盟评估文件（EADs）
European Organisation for Technical Approvals (EOTA) as the basis for issuing ETAs for products not covered by hENs.The harmonised technical specification for a product defines EEA-wide methods of assessing and declaring
对于没有被协调标准完全覆盖的建筑产品的认证，可以通过EOTA机构核发ETA认证证书（等同于CE认证书）。
锚栓涉及的EAD标准：
EAD 330232-00-0601 混凝土用金属锚栓（可应对所有动载荷需求：C1级和C2级抗震，抗冲击和疲劳负载）
EAD 330499-00-0601 混凝土用粘结型锚栓
EAD 330196-00-0604 固定外保温复合系统用塑料锚栓
EAD 330087-02-0601 后锚固植筋胶
EAD 330747-00-0601 机械锚栓多锚固
